moveable UV germicidal light for covid virus
Minimum Working Voltage
UV radiation intensity
Light Source Power
3.8W (U-shaped tube)
How To Use:
1. Long press the power button for 3 seconds, light will be switched on after a delay of 28 seconds. The blue delay indicate light will be flashing during the 28 seconds, after which lamp will start working and the indicate light will be turned on. The disinfection lamp will turn off automatically after 30 minutes.
2. When the lamp is working, short press the power button will turn off light immediately.
Where to use:
Mask ,Elevator switch button;Restaurant chopsticks and cutlery;Door handle, steering wheel;
Glasses surface, mobile phone surface,Underwear,Toiletries.Car
Do not look directly into the UV light source and use the device in the absence of people, animalsand plants as the UV light may cause rash, conjunctival irritation, fatigue etc.- Long time exposure to UV light has the potential hazard of skin and eye burning, long time inhaling ozone can damage the respiratory tract. Please close doors and windows during the sterilization, and no people or animals should be staying in the same room. (Attention: No people, animals or plants should be present while the ultraviolet germicidal lamp is working! Direct exposure to UV radiation maycause skin and eye damage.)